VMECA Premium Pump

If you face problem with fluctuating supply air pressure, yet if you need high vacuum pressure, why not try our new premium pumps. Two versions are available, PM and PML series. PM series offers higher vacuum pressure of -92kpa at lower flow rate as compared to PML series which offer higher flow rate but at a lower vacuum pressure of -75kpa. The supply air pressure is between 3 to 6 bar for both models. Because the premium pump has the same physical dimensions as the classic pumps, therefore, it can directly replace all existing classic vacuum pumps. For more detailed information, please contact: Maxpell Sdn Bhd Tel:04-6586999 Fax:04-6586959. Email:maxpell@streamyx.com,Sales@maxpell.com

VMECA Vacuum Auto Lock System

Normally, the suction cup is connected to the ball joint and level compensator to pick up workpiece whose surface is not horizontal but is inclined at a certain angle, or irregular or odd shaped objects where it is almost impossible to locate the centre of gravity. During transfering, the workpiece tends to wobble and shake, and tend to tilt towards the side which is heavier. VMECA's Valock system locks the ball joint and the level compensator once the vacuum cup holds the workpiece securely and safely. Upon reaching the set vacuum pressure, the vacuum switch will send a pneumatic signal to lock both ball joint and level compensator, thereby, preventing shaking or wobbling during part transfer, even though the workpiece is picked from any position outside its centre of gravity. For more detailed information, please contact: Maxpell Sdn Bhd. Tel:04-6586999 Fax:04-6586959. Email:maxpell@streamyx.com, Sales@maxpell.com

VMECA MD Vacuum Pump

There are 2 models available, MD and MDL series. Either model need only between 3 to 6 bar supply air pressure to operate. Because the pump can be mounted very near to the point of use, it can reduce cycle time to a minimum and is, therfore, a fast response pump. This pump is useful for use in areas like vacuum chuck, vacuum table for holding down workpiece. For more detailed information, please contact: maxpell Sdn Bhd. Tel:04-6586999 Fax:04-6586959 Email:maxpell@streamyx.com, Sales@maxpell.com

VMECA Vacuum Speeder Module

Besides the vacuum speeder VCS, VMECA also come out with another similar model known as the Vacuum Speeder Module. There are 2 types available, VSM and VSMR. The only difference between this 2 types is that VSM model needs to have vacuum release valve but VSMR type does not need vacuum release valve, yet the workpiece can be released very fast, thanks to the built-in inflow device which allows the inflow of atmospheric air to break the vacuum. If you are using more than one suction cups for pick and place, VSMR model has the added advantage that in case one or more of the suction cups is/are not picking up the goods, the vacuum for the rest of the cups are not affected. Because of this added feature, the VSMR model is suitable for picking goods of different sizes. For more detailed information, please contact: Maxpell Sdn Bhd. Tel:04-6586999 Fax:04-6586959. Email:maxpell@streamyx.com,Sales@maxpell.com

VMECA Mega Turtle Pump

With the success of the VMECA turtle pump, KPS Korea launched the next generation of turtle vacuum pump known as the Mega Turtle Pump. The new pump has all the advantages and features associated with the turtle pump but with a difference-increase vacuum flow rate of about twice that of turtle pump. This means faster response time and is, therefore, suitable for use with large suction cups.

By nature of the shape of the pump which looks like a turtle, thus this is how it got it's name. As the name " turtle " implies, it means long lasting pump lifespan, and technically, it means reliability. The construction of this unique product is its compactness, with integral vacuum filter and silencer combined with the optional on/off control valve, energy saving unit, vacuum release valve and vacuum switch to create an optional vacuum solution for many applications. One unique feature of this pump is that the vacuum flow rate is adjustable with dummy cartridges. If large vacuum flow is not needed, one or more of the vacuum cartridges can be replaced with dummy cartridges, thus, air consumption is also proportional reduced. In other words, the pump can be transformed to suit different application requirements, a feature which no other pumps can boast off. For more information, please contact: Maxpell Sdn Bhd. Tel:04-6586999 Fax:04-6586959 Email:maxpell@streamyx.com, Sales@maxpell.com

VMECA V-Grip System

In May, VMECA launched their new modular design vacuum gripping system called the V-Grip System. It is designed to handle products with different shapes, sizes and especially excellent for handling porous materials.
The built-in adjustable multiple check valve holes are perfect for closing of the idle suction ports. Flexible sealing foam for gripping both even and uneven surfaces. Simple to operate, easy to install and low maintenance are the standout features of this new vacuum gripping system. For more detailed information, please contact: Maxpell Sdn Bhd. Tel:04-6586999 Fax:04-6586959 Email:maxpell@streamyx.com, Sales@maxpell.com

VMECA Turtle Pump

If you face the problem of fluctuation of supply air pressure, then, VMECA's turtle pump is the solution for you. The pump needs only supply air pressure of between 3 to 6 bar to operate. Even at such a low air supply pressure, it can generate up to -93kpa vacuum pressure for the VTC series. It offers a very complete and compact system where the vacuum pump, filter, air supply and vacuum release valves, digital vaccum switch, analog vacuum gauge and vacuum pads are all built into one unit, unlike the conventional methods as shown in the typical installations 1 and 2. For more detailed information, please contact: maxpell Sdn Bhd Tel:04-6586999,Fax:04-6586959. Email:maxpell@streamyx.com,Sales@maxpell.com

VMECA V-Pump

• 
  
  VMECA's V-Pump is designed for use in areas where multiple vacuum outlets are required as it can offer up to 8 multiple outlets. It's main advantages are :
  
• High operational reliability despite flunctuating pressure.
• Quick Response time.
• VTEC's twinfold silencer assures low noise level.
• Easy to distribute vacuum-up to 8 multiples outlets available.
• Optional air-saving kit available to minimise energy consumption.
• Optional air control/vacuum release valves and vacuum switch available.
• Easily mountable and interchangeable vacuum cartridges.

For more information, please contact: Maxpell Sdn Bhd Tel: 04-6586999 Fax:04-6586959 Email:maxpell@streamyx.com, Sales@maxpell.com.

VMECA Vacuum Speeders

VMECA's vacuum speeder combines the vacuum pump & the level spring to form a compact unit. Simply by supplying compressed air to the air inlet port of the vacuum speeder and by connecting the other end to a suction cup, you have a complete system consisting of vacuum pump, level spring, suction cup and built-in vacuum filter. It's a 4 in 1 compact unit as compared to conventional method where the pump, level spring, vacuum filter and suction cups are connected by fittings and tubings. With more joints, fittings and tubings, the chances of leakage will be higher, and the evacuation time will be longer due to bigger volume of compressed air that need to be evacuated to achieve the required vacuum level. For more information, please contact: Maxpell Sdn Bhd. Tel:04-6586999 Fax: 04-6586959 Email:maxpell@streamyx.com,Sales@maxpell.com

VMECA Vacuum Cartridges...The Backbone Of All VMECA Pumps

Now, you can have the option of building your own vacuum pump, from very small to very big vacuum pumps depending on your requirements, simply by using one of the VMECA vacuum cartridges available at an incredibly affordable price to everybody ! By fabricating your own housing, the dimension of which will be provided to you free-of-charge, you can have the proud satisfaction of building your very own vacuum pump at a price you can afford.......but most important of all........it works ! For more information, please contact:
Maxpell Sdn Bhd. Tel:04-6586999 Fax: 04-6586959 Email:maxpell@streamyx.com, Sales@maxpell.com

VMECA Vacuum Conveyors.......You Name It........We Convey It For You

VMECA vacuum conveyors are designed for automatic transfer of both powdered and non powdered products over long distances by using vacuum power, to replace outdated electric motor driven screwed conveyors.Thanks to VMECA's air driven vacuum pumps which are easy to operate, low noise, vibration-free, heat-free but most important of all............trouble & almost maintenance-free ! For more information, pls contact Maxpell Sdn Bhd. Tel:04-6586999 Fax:04- 6586959
Email: maxpell@streamyx.com, Sales@maxpell.com

VMECA Pneumatically Operated Vacuum Pumps

VMECA's vacuum pumps are compressed air driven multi-stage air ejectors with considerably higher performance than conventional single-stage ejectors.

The expansion of compressed air is controlled so as to produce maximum energy at minimum pressure.

The multi-stage principle gives very high efficiency and combines large flow with a deep vacuum, energy-saving unit, this means minimal air consumption, and with practically no maintenance required and thus low running cost as compared to electric driven vacuum pumps. For more information, please contact Maxpell Sdn Bhd, Tel:04-6586999 Fax:04-6586959 Email: mailto:maxpell@streamyx.com,

VMECA Water Free Module..... Why Not Give It A Try To Find Out More ?

Click the "play" button to see the short video presentation.With VMECA water free module installed in your machine, it makes your life easy and trouble-free and, at the same time, it prolongs the lifespan of machinery. Gone are the days of worry about wear & tear due to rusty surfaces as a result of moisture in compressed air. Please contact Maxpell Sdn Bhd for more detailed information. Tel: 04-6586999 Fax: 04-6586959 Email: maxpell@streamyx.com, Sales@maxpell.com

VMECA Floating Suction Cup.......The Cup Of The Future

Click the "play" button to see the short video presentation.Experience the amazing VMECA floating suction cup where the product and the cup are not touching each other. Contact Maxpell Sdn Bhd for more information. Tel: 04-6586999 Fax: 04-6586959 Email: maxpell@streamyx.com, Sales@maxpell.com

VMECA's Product Exhibition In Shanghai, China

KPS Korea, the manufacturer of VMECA vacuum products, participated in the Shanghai Exhibition on 27 -30 -Oct/2008.

VMECA Vacuum Conveyor At Work

An example of a VMECA vacuum conveyor at work, transfering powder and granules up to a height of about 4 metres at an Ipoh plant. For more detailed information, please contact: Maxpell Sdn Bhd Tel:04-6586999 Fax:04-6586959 Email:maxpell@streamyx.com, Sales@maxpell.com

Click the "Arrow" button to see the video clip on the transfer of fine glue powder by VMECA's vacuum conveyor model VTEC200-EC-B c/w stainless steel feed nozzle.

Click the "Arrow" button to see the video clip on the transfer of green tea leaves by VMECA's vacuum conveyor VTEC200-EC-B c/w stainless steel feed nozzle.

Click the "Arrow" button to see the video clip on the transfer of dry corn granules by VMECA's vacuum conveyor VTEC200-EC-B c/w stainless steel feed nozzle.

VMECA 's Full Range Of Vacuum Suction Cups

VMECA can offer full range of suction cups with different cup materials, sizes and shapes and complete with fittings and level springs, to cater for different applications and to serve both the OEMs and industries. If you need to pick and place, transfering, lifting, lowering, turning or do just about anything, whether light or heavy, porous or non porous material, even or uneven surfaces, why not let the cups do the job for you. For more information, pls contact: Tel:04-6585999 Fax:04-6586959.

Email:maxpell@streamyx.com, Sales@maxpell.com

VMECA Keyboard Vacuum Pumps

If you need to use more than one vacuum pumps, why not try VMECA's keyboard vacuum pumps which are compact with built-in integral air supply & vacuum release valves, vacuum switches & filters, check valves & silencers. The pumps can be assembled in any configuration according to customer's requirement. For more information, please contact: Maxpell Sdn Bhd. Tel:04-6586999 Fax:04-6586959 Email:maxpell@streamyx.com, Sales@maxpell.com

VMECA Vacuum Accessories

Besides vacuum pumps and suction cups, VMECA can offer a full range of accessories to compliment them. For more detailed information, please contact: Maxpell Sdn Bhd Tel:04-6586999 Fax:04-6586959 Email: maxpell@streamyx.com, Sales@maxpell.com